You’ve probably had to bleed brakes when no one was around to help. That’s a pretty tough job alone, unless you have a vacuum or pressure brake bleeder set-up. Motive Products has several pressure brake bleeders that work well with one person. The concept is simple. Place the brake pressure bleeder on the master cylinder. With brake fluid in the master cylinder and in the bottle, pump up the brake system with the Motive pump. This is similar to what happens when you pump the brake pedal. Brake fluid is pressurized and pushed toward the bleeders. Hook up your fluid catch bottles and open the bleeder screw. You should see fluid and air come out, if there is any. If you stop seeing air bubbles come out close the bleeder screw. Move onto the next bleeder screw and repeat until all 4 are done. Pressure brake bleeders work incredibly well and they’re affordable for the do-it-yourselfer!